Hardware manual

Electra Elite Issue 8
System Hardware Manual 8 - 37
14.2.3 Installing the AD(A)-R Unit on a DTH/DTR Multiline
Ter minal
1. Unplug the telephone cord (and the AC-R Unit cord
if installed) from the Multiline Terminal.
2. Prepare Multiline Terminal for adapter installation.
Refer to Section 13 Preparing DTH/DTR Multiline
Terminal for Adapter Installation.
3. Plug the A and B tabs in adapter slots as shown on
Figure 8-51 Attaching the AD(A)-R Unit to the
Multiline Terminall, and press down on the adapter
until it clicks into place.
4. Install the Base Cover and the line cord.
14.2.4 AD(A)-R Connections and Specifications
Table 8-2 AD(A)-R Cable Connections provides a cable
connections list and describes the specifications for the
AD(A)-R Unit.
Figure 8-51 Attaching the AD(A)-R Unit to the Multiline Terminal