Hardware manual

Issue 8 Electra Elite
8 - 36 Installing Electra Elite IPK and D
term
Series i Equipment
2. Insert cable into the AD(A)-R Unit terminal, fit a cap
(included with the Unit) over the cable and push to
anchor it as shown in Figure 8-49 Core Cable
Installation. The core cable should be inserted with
its cover. The shielded cable should be bundled
before inserting it in the terminal.
3. Feed the installed cable out through the CN2
window as shown in Figure 8-50 Cable Access Port.
Figure 8-49 Core Cable Installation
Figure 8-50 Cable Access Port