Hardware manual

Electra Elite Issue 8
System Hardware Manual 8 - 35
5. When sending recorded calls to the terminal, Set the
DSW Switch to settings shown in Figure 8-46 DSW
Switch Settings for Sending Voice Calls to Terminal
and connect wiring to recorder as shown in Figure
8-47 Connections for Sending Calls to The Terminal.
14.2.2 Installing Core and Shielded Cable
1. Remove the screw shown on Figure 8-48 Removing
Cover and carefully open the AD(A)-R Unit.
Figure 8-46 DSW Switch Settings for Sending Voice Calls to Terminal
Figure 8-47 Connections for Sending Calls to The Terminal
Figure 8-48 Removing Cover