Hardware manual

Issue 8 Electra Elite

8 - 30 Installing Electra Elite IPK and D

term

Series i Equipment

SECTION 14

NSTALLATION

ROCEDURES

14.1 AC-R Unit (AC Adapter)

This unit shown on Figure 8-40 AC-R Unit provides power to

ancillary devices or DTR Attendant Consoles. The AC-R Unit must

be connected to an adapter that is installed on a Multiline Terminal.

When more than one adapter is installed on a Multiline Terminal,

only one AC-R Unit is necessary.

The power requirements for the AC-R Unit are:

Input: 110~240V AC, 50/60 Hz, 45 VA

Output: 27V DC, 750 mA

Polarity:

14.1.1 Connecting the AC-R Unit

1. Unplug the AC-R Unit from the AC outlet. (Failing to

do this can damage the unit and/or the Multiline

Ter minal. )

2. Prepare Multiline Terminal for adapter installation.

Refer to Section 13 Preparing DTH/DTR Multiline

Terminal for Adapter Installation on page 8-27.

Figure 8-40 AC-R Unit

⊕