Hardware manual

Issue 8 Electra Elite
8 - 20 Installing Electra Elite IPK and D
term
Series i Equipment
2. Turn the hook with the tab toward the top.
3. Slide the hook on its glides back down into position forming
the hanger hook for the handset.
11.2 Installing the Base Cover on the Wall
1. Raise and remove the Base Cover. Refer to Section 9
Removing or Installing the Base Cover.
2. Remove cutout shown in Figure 8-26 Removing Cutout with
nippers.
Figure 8-25 Sliding the Hook into Position
Figure 8-26 Removing Cutout