Hardware manual

Issue 8 Electra Elite
8 - 12 Installing Electra Elite IPK and D
term
Series i Equipment
Ensure that the AC adapter, supplied with the Attendant
Console, is used. Using a different AC adapter may
cause problems. Check that the supplied voltage
matches that of the adapter and plug it in an outlet.
SECTION 6
A
DJUSTING THE DTH/
DTR LCD
DTH/DTR display Multiline Terminals have an adjustable Liquid Crystal
Display (LCD). The LCD can be adjusted by pushing downward or upward
as desired.
SECTION 7
I
NSTALLING DTH/
DTR L
INE CARDS
AND PLASTIC
P
ANELS
Line key designations are entered on the Line Card that is then placed on
the Multiline Terminal to provide a quick reference of key designations.
The Line Card can be changed as necessary. The Plastic Panel is placed
on top of the Line Card to hold it in place.
Refer to Figure 8-15 Removing the Line Panel, and lift to remove the Line
Panel.
Figure 8-14 Adjusting the DTH/DTR LCD