Hardware manual

Issue 8 Electra Elite
8 - 10 Installing Electra Elite IPK and D
term
Series i Equipment
SECTION 5
C
ONNECTING DCR
A
TTENDANT CONSOLE
TO A MULTILINE
T
ERMINAL
An Attendant Console can be attached to a Multiline Terminal using the
following procedures.
1. Turn the Multiline Terminal and the Attendant Console face down.
2. Using the joining plate provided with the Attendant Console, attach
the plate to the Multiline Terminal and the Attendant Console. Refer
to Figure 8-11 Joining DCR Console to a Terminal.
Figure 8-11 Joining DCR Console to a Terminal