Hardware manual

Issue 8 Electra Elite
7 - 58 Installing Optional Equipment
8. The necessary device drivers are installed.
9. Select Finish to close the dialogue.
10. Now run Setup.exe on your NEC installation CD to
install necessary application software on your PC.
11. Connect a telephone to the VSR ports, and you
can record.
Ports are interchangeable between multiline
terminal and Electra Elite System
3.17.6 VSR Application Software
The VSR software is delivered on a Compact Disk using a
self-starting install shield. The CD contains all applicable
files and installation procedures to operate to this
specification, including USB device drivers, software
application, and Help files.
A quick-start instruction sheet and a pre-recorded user
guide that steps the user through the various options are
provided.
The VSR application supports Microsoft Operating
Systems that support USB devices. the following systems
meet this requirement:
WIN 98SE
WIN Millennium Edition (ME)
WIN 2000
WIN XP (all variants)
VRS does not support WIN 95 and below, or WIN NT.
3.17.7 VRS User Interface Tab Options
VRS has the following tabs to allow the user to select
features and options:
Playback allows various playback features of
recorded conversations.
Record allows control of recording.
About provides software version information.
Options to set-up controls such as recording format.
File Management allows the user to manage disk
space used by the VSR.