Hardware manual

Electra Elite Issue 8
System Hardware Manual 7 - 55
3.17.2 Connectors
One connector that allows USB cable connection to
the PC USB connector to provide power and stream
all speech and control channel information to the
host PC and desktop software.
Two digital telephone line connectors that passively
tap across the connection between the Electra Elite
IPK KSU and a DTH Digital Telephone to “listen” in
high impedance mode to the signaling on the line.
3.17.3 Requirements for installation
The VSR is packaged with everything necessary for
installation including:
Software CD
USB Cable
Telephone connection lead
Quick-start installation manual
3.17.4 Installation Procedures for Windows 98 or ME
1. Run the Setup.exe program file from the NEC
installation CD before connecting the telephone
interface unit to your PC.
2. Connect the VRS UBC interface connector to your
PC using the provided USB cable.
3. Connect your telephone to either VSR port.
4. Connect the other VSR port to the telephone
system, and recording is enabled.
3.17.5 Installation procedure for Windows 2000 or XP
1. Using the provided USB cable, connect the VRS
USB interface to your PC.
2. Windows automatically detects the new hardware
and displays a Wizard dialog box.