Hardware manual

Electra Elite Issue 8
System Hardware Manual 7 - 49
7. Connect the line cord to the Multiline Terminal.
8. With the WMU-U Unit attached to the wall, hook the
two bottom tabs on the WMU-U Mount Unit in the
tab slots on the Multiline Terminal. Then push the
two top tabs on the WMU-U Unit into the tab slots on
the Multiline Terminal. When the adapter has a
power supply, lead the AC adapter cord out through
the opening at the bottom of the Multiline Terminal.
Refer to Figure 7-63 Attaching the Multiline Terminal
to the WMU-U Unit.
Figure 7-63 Attaching the Multiline Terminal to the WMU-U Unit
Wall
WMU-U Unit
Tab Slots
Multiline
Terminal
Adapter