Hardware manual

Issue 8 Electra Elite
7 - 48 Installing Optional Equipment
5. Place the bundled line cord in the space between
the WMU-U Unit and the wall. Lead the line cord out
through the slits as shown in Figure 7-61 Leading
the Line Cord out of the WMU-U Unit.
6. Attach the WMU-U Unit to the posts on the wall
plate (locally provided). Place locally provided
screws in the nodes on the WMU-U Unit and secure
the WMU-U Unit to the wall.
Figure 7-61 Leading the Line Cord out of the
WMU-U Unit
Figure 7-62 Attaching the Wall Mount Unit to the Wall
Posts
Nodes
Nodes