Hardware manual

Electra Elite Issue 8
System Hardware Manual 7 - 47
2. Cut off the tabs on the adapter as shown in Figure
7-59 Removing the Tabs from the Adapter.
3. Remove the tabs from the WMU-U Unit as shown in
Figure 7-60 Removing the Tabs from the WMU-U
Unit. (Tabs removed depends on the Multiline
Terminal type.)
4. Bundle the cord from the modular jack leaving about
eight inches. Use a tie wrap to secure the bundled
cord.
Figure 7-59 Removing the Tabs from the Adapter
Figure 7-60 Removing the Tabs from the WMU-U Unit
Cut
Cut
Cut
Cut
Cut
DTP/DTU-32-1 TEL
DTP-32D-1/DTU-32D-2 TEL
DTP/DTU-8-1 TEL
DTP-8D-1/DTU-8D-2 TEL
DTP/DTU-16-1 TEL
DTP-16D-1/DTU-16D-2TEL
DCU-60-1 CONSOLE