Hardware manual

Electra Elite Issue 8
System Hardware Manual 7 - 43
When using a modular jack instead of a wall plate,
put the modular jack inside the base unit as shown
in Figure 7-53 Wall Mounting Using a Modular Jack.
Use the locally provided screws to attach the base
unit directly to the wall.
Plug the line cord into the jack on the wall plate,
wrap the extra cord and secure it with a tie wrap,
and lead the line cord out through the groove in the
side of the base unit.
Figure 7-53 Wall Mounting Using a Modular Jack
Figure 7-54 Plugging in the Line Cord Using a Wall
Jack