Hardware manual

Electra Elite Issue 8
System Hardware Manual 7 - 41
3.12.2 Wall Mounting using the Base Unit
1. Refer to Section 2 Preparing Multiline Terminal for
Adapter Installation, and perform Steps 1~5.
2. Press both sides of the base cover and turn it left to
remove it.
3. Rotate base cover 180°, and install it again on the
Multiline Terminal.
4. Remove the shaded base plate knockout shown on
Figure 7-51 Removing the Knockout with nippers.
Figure 7-50 Positioning the Handset Hanger