Hardware manual

Issue 8 Electra Elite

7 - 40 Installing Optional Equipment

3.12 Wall Mounting

Any Electra Elite Multiline Terminal can be mounted on a wall.

Multiline Terminals can be wall mounted by using the base unit that

comes with the Multiline Terminal or by using the WMU-U Unit to

accommodate adapters that are installed on the Multiline Terminal.

3.12.1 Removing and Remounting the Handset Hanger

1. Remove the hanger by sliding it out of the slot.

2. Install it back in its original position so that the

hanger protrudes providing a rest for the handset.

(This procedure applies when using either the base

unit or the WMU-U Unit.) Refer to Figure 7-50

Positioning the Handset Hanger for the steps for

removing and remounting the handset hanger.

Figure 7-49 Connecting the Cables on the VDD-U Unit

LAN Cable t

VDH2(8)-U1

LAN Cable

to PC