Hardware manual

Issue 8 Electra Elite
7 - 38 Installing Optional Equipment
3.10.2 Wall Mounting the SLT(1)-U( ) ADP
1. Remove the two screws from the top to open the
SLT Adapter as shown in Figure 7-46 Removing
Screws from SLT(1)-U( ) ADP.
2. Using the two provided wood screws, attach the unit
to the wall. Close the unit and secure with the two
screws that were previously removed.
Figure 7-46 Removing Screws from SLT(1)-U( ) ADP
Figure 7-47 Attaching the SLT(1)-U10 ADP to the
Wall