Hardware manual

Issue 8 Electra Elite
7 - 36 Installing Optional Equipment
3.9.1 Connecting a MIC/Line-In
When using the microphone input (MIC), connect an
electric condenser microphone. Phantom power
(-2.2 Vdc) is supplied.
When using the line-level input (Line-In), connect to
a line-level device such as a CD or cassette player.
3.10 SLT(1)-U( ) ADP (Single Line Telephone)
The Single Line Telephone adapter provides an interface for Single
Line Telephones and other similar devices from an ESI ETU
channel. This adapter can be connected to any ESI port.
3.10.1 Connecting the SLT(1)-U( ) ADP to the System
1. Connect one end of the RJ-11 to the ESI port on the
KSU and one end to the ESI jack on the SLT
Adapter.
2. Connect one end of a second RJ-11 to the TEL jack
on the SLT Adapter and the other end to the Single
Line Telephone.
Figure 7-44 Connecting a Single Line Telephone to the
System Using an SLT(1)-U( ) ADP
SLT(1)-U10 ADP
E
S
I
RJ-11
RJ-11
2-wire 2-wire
ESI
T
E
L