Hardware manual

Issue 8 Electra Elite
7 - 22 Installing Optional Equipment
3.5.1 Installing the CTA-U Unit
1. Prepare Multiline Terminal for adapter installation.
Refer to Section 2 Preparing Multiline Terminal for
Adapter Installation.
2. Plug the unit into the receptacle connector inside
the base plate on the Multiline Terminal. Refer to
Figure 7-27 Attaching the Unit to the Multiline
Ter minal .
3. Close the base plate.
3.5.2 Connecting the Cables on the CTA-U Unit
Connect the RS-232C cable from the computer to the
connector on the CTA-U Unit as shown in Figure 7-28
Connecting the RS-232C Cable to the CTA-U Unit on the
Multiline Terminal.
Figure 7-27 Attaching the Unit to the Multiline
Terminal