Hardware manual

Electra Elite Issue 8
System Hardware Manual 6 - 25
Never install telephone wiring during a lightning storm.
Never touch uninsulated telephone wires or terminals
unless the telephone line has been disconnected at the
network interface.
Use caution when installing or modifying telephone lines.
Using the telephone line cord supplied with the D
term
Analog
Cordless terminal, connect the TEL LINE to the telephone line.
12.3 Applying Power to the Base Unit
1. Plug the AC Adapter connector in the DC IN 9V jack.
2. Route the power cord where it does not create a trip hazard or
where it could become chafed and create a fire or other
electrical hazards.
3. Plug the AC Adapter in a standard 120 Vac wall outlet.
The AC Adapter furnished with this phone should be
equipped with a polarized line plug (a plug having one
blade wider than the other). This plug fits into the power
outlet only one way. When you cannot insert the plug
fully into the outlet, reverse the plug. When the plug still
does not fit, contact your facilities coordinator about
replacing the obsolete plug. Do not alter the shape of
the blades of the polarized plug.
Observe the following warnings during
installation.