Hardware manual

Issue 8 Electra Elite
6 - 24 Installing Electra Elite Multiline Terminals
SECTION 12
I
NSTALLING A D
term ®
A
NALOG CORDLESS
T
ERMINAL 12.1 Selecting an Installation Location
Select a location to avoid excessive heat or humidity. The base
unit should be placed on a desk or tabletop near a standard 120
Vac outlet and within reach of the telephone line connection on the
Electra Elite Multiline Terminal. Keep the base unit and the
handset away from sources of electrical noise (e.g. fluorescent
lighting).
Depending on your environment, the maximum number of cordless
devices used without interference varies.
12.2 Connecting the Telephone Cord
The DTR-1R-1 D
term
Analog Cordless terminal is connected to an
analog port on the KSU using one of the following: SLI(4)/(8)-U( )
or OPX(2)-U( ) ETU, SLT(1)-U( ) ADP, or APR-U Unit connected to
the multiline terminal. A TEL LINE jack is located on back of the
base unit of the D
term
Analog Cordless terminal.
Figure 6-28 D
term
Analog Cordless Terminal