Hardware manual

Electra Elite Issue 8
System Hardware Manual 6 - 23
11.3 Applying Power to the Base Unit
1. Power to charge the battery is supplied from the Telephone
line.
2. An ACA-U Unit must be installed in the optional DC24V jack
on the Base Unit to provide power for the D
term
Handset
Cordless terminal.
3. Plug the ACA-U Unit into a standard 120 Vac wall outlet.
4. The power level between the Handset and the Base is
10mW.
5. When the ACA-U Unit is used, route the power cord where it
does not create a trip hazard or where it could become
chafed and create a fire or electrical hazard.
Figure 6-27 D
term
Handset Cordless Terminal