Hardware manual

Issue 8 Electra Elite

6 - 22 Installing Electra Elite Multiline Terminals

SECTION 11

NSTALLING D

term ®

HANDSET CORDLESS

ERMINAL 11.1 Selecting an Installation Location

Select a location for the DTP-16HC-1 TEL to avoid excessive heat

or humidity. The base unit should be placed on a desk or tabletop

near a standard 120 Vac outlet and within reach of the telephone

line connection on the Electra Elite Multiline Terminal. Keep the

base unit and the handset away from sources of electrical noise

(e.g., fluorescent lighting).

Depending on your environment, the maximum number of cordless

devices used without interference varies.

11.2 Connecting the Telephone Cord

The Base Unit of the DTP-16HC-1 Tel has two jacks on the back:

LINE and DC24V.

Never install telephone wiring during a lightning

storm.

Never touch uninsulated telephone wires or

terminals unless the telephone line has been

disconnected at the network interface.

Use caution when installing or modifying telephone

lines.

Using the telephone line cord supplied with the terminal, connect

the LINE jack to the telephone line.

Observe the following warnings during installation.