Hardware manual

Electra Elite Issue 8
System Hardware Manual 6 - 21
Depending on your environment, the maximum number of cordless
devices used without interference varies.
10.3 Applying Power to the Base Unit
1. Plug the AC Adapter cord into the AC Adapter input jack on
the Base Unit.
Use only the AC Adapter supplied with the D
term
Handset Cordless Terminal.
2. Plug the AC Adapter into a standard 120 Vac wall outlet.
3. Route the power cord where it does not create a trip hazard or
where it could become chafed and create a fire or other
electrical hazards.
The AC Adapter furnished with this phone can be
equipped with a polarized line plug (a plug having one
blade wider than the other). This plug fits into the power
outlet only one way. When you cannot insert the plug
fully into the outlet, reverse the plug. When the plug still
does not fit, contact your facilities coordinator about
replacing the obsolete plug. Do not alter the shape of
the blades of the polarized plug.
Figure 6-26 Connecting the Base Unit
Line IN from
Telephone Jack
Line OUT to Host