Hardware manual

Issue 8 Electra Elite
6 - 20 Installing Electra Elite Multiline Terminals
10.2 Connecting the Telephone Cords
The D
term
Cordless Lite or Cordless II terminal is connected to the
telephone line and to the host telephone using two telephone line
jacks on the back of the Base Unit: LINE IN and LINE OUT.
Never install telephone wiring during a lightning
storm.
Never touch uninsulated telephone wires or
terminals unless the telephone line has been
disconnected at the network interface.
Use caution when installing or modifying telephone
lines.
1. Unplug the telephone line cord from the host telephone, and
connect it to the LINE IN jack.
2. Using the telephone line cord supplied with the D
term
Cordless Terminal, connect the LINE OUT jack to the host
telephone jack.
Figure 6-25 D
term
Cordless II
Observe the following warnings during installation.