Hardware manual

Electra Elite Issue 8
System Hardware Manual 6 - 17
SECTION 9
A
DJUSTING DTU/DTP
M
ULTILINE TERMINAL
H
EIGHT
The base plate on the Electra Elite Multiline Terminal is hinged to allow
adjustment to raise or lower the terminal.
1. Turn the Multiline Terminal upside down and locate the tabs as
shown in Figure 6-20 Locating the Adjustment Tabs on the DTU/DTP
Multiline Terminal.
2. Push the adjustment tabs and raise the base plate until it locks.
Figure 6-20 Locating the Adjustment Tabs on the DTU/DTP
Multiline Terminal
Figure 6-21 Raising the Base Plate on the DTU/DTP Multiline Terminal