Hardware manual

Issue 8 Electra Elite

6 - 14 Installing Electra Elite Multiline Terminals

SECTION 7

NSTALLING DTU/DTP

INE CARDS AND

LASTIC PANELS

7.1 Line Card and Plastic Panel Installation

Line key designations are entered on the Line Card that is then

placed on the Multiline Terminal to provide a quick reference of key

designations. The Line Cards can be changed as necessary. The

Plastic Panel is placed on top of the Line Card to hold it in place.

1. Place the Line Card over the keys on the Multiline Terminal.

2. Place the tabs on the bottom of the plastic panel in the

grooves at the terminal bottom, and press top right and left

ends to secure plastic panel to the Multiline Terminal. Refer to

Figure 6-16 Installing Line Card and Plastic Panel on a DTU/

DTP Multiline Terminal and Figure 6-17 Installing Plastic

Panel on a DTU/DTP Multiline Terminal.

Figure 6-16 Installing Line Card and Plastic Panel on a DTU/DTP

Multiline Terminal