Hardware manual

Electra Elite Issue 8
System Hardware Manual 6 - 11
SECTION 4
C
ONNECTING A DTU/
DTP T
ERMINAL TO
THE SYSTEM
The instructions for connecting a Multiline Terminal to the system applies
to all of the Electra Elite Multiline Terminals.
1. Plug the telephone cord into the modular jack on the bottom side of
the Multiline Terminal. The handset is also attached to the bottom
side of the Multiline Terminal.
2. Lead the telephone and handset cords through the appropriate
grooves.
Figure 6-11 Connecting a Multiline Terminal to the System
Figure 6-12 Leading Line Cords on a Multiline Terminal