Hardware manual

Electra Elite Issue 8
System Hardware Manual 5 - 149
Table 5-68 IVR(8)-U( ) ETU Ready LED Indications
shows the status of the IVR(8)-U( ) ETU after it has been
installed, initialized and is ready to process calls.
7.8.5 Jumper Settings
Table 5-68 IVR(8)-U( ) ETU Ready LED Indications
LED Description Status
LED 1, AP1
Application Software
Running without errors Solid Green
LED 4, CF PWR Power to the ETU Solid Red
LED 5, ICGA Live LED Blinking Red
LED 7, SHUT DOWN Initialized application Solid Green
LED 8, Power Receiving KSU power Solid Red
J1 Setting
Pin 1 to Pin 2 IVR(8)-U( ) ETU Integration (default)
Pin 2 to Pin 3 Not Used
J7 Setting
Pin 1 to Pin 2 Not Used
Pin 2 to Pin 3 Hard Drive is master drive (default)