Hardware manual

Electra Elite Issue 8
System Hardware Manual 5 - 125
Table 5-55 BSU(2)-U( ) ETU Default Switch Settings
SW1 Description
Momentary Switch BSU ETU Reset
SW2-1 Description
Off Reports BSU ID to Main S/W
(Master)
On Does not report BSU ID to Main S/W
(Slave)
SW2-2
Description
Off Boot by Flash memory (Default)
On Boot from E-Prom (IC30)
SW2-3 Description
Off Normal Operation (Default)
On Test Mode
SW2-4 Description
Off Watch Dog Timer On (Default)
On Watch Dog Timer Off
Pressing SW2 interrupts all service and
causes a second initialization. This
switch should not be used in an
Pressing SW1 interrupts all Wireless user
s
connected to the BSU(2)-U( ) ETU. Use thi
s
switch only as a last resort.