Hardware manual

Electra Elite Issue 8
System Hardware Manual 5 - 117
6.4.4 LED Indications
Refer to Table 5-52 VMS(2)/(4)/(8)-U( ) ETU LED
Indications.
Table 5-52 VMS(2)/(4)/(8)-U( ) ETU LED Indications
LED Description On Flashing Off
LIVE ETU status Receiving
power
Not Used No Power
CH1 Port status Busy Not Used Idle/Not used
CH2 Port status Busy Not Used Idle/Not used
CH3 Port status Busy Not Used Idle/Not used
CH4 Port status Busy Not Used Idle/Not used
CH5 Port status Busy Not Used Idle/Not used
CH6 Port status Busy Not Used Idle/Not used
CH7 Port status Busy Not Used Idle/Not used
CH8 Port status Busy Not Used Idle/Not used
MB MB Switch
status
ON Not Used OFF
BIOS BIOS Error
Status
BIOS Error Not Used No error
BCLR Application
status
Red
DOS started
(VM not ready)
Green
VM running
Orange Error
Not Used Idle
If BCLR LED is orange, check error type on console screen. After
error is corrected, LED automatically changes to green. Do Not
connect link between console and ETU until BCLR turns green
during booting.
HDD Hard Disk
status
Not Used Hard Disk
active
Hard Disk
inactive
Do not reset the ETU while the HDD LED is flashing.