Hardware manual

Electra Elite Issue 8
System Hardware Manual 5 - 19
3.7.3 Switch Settings
Refer to Table 5-5 MIFM-U( ) Default Switch Settings.
3.7.4 LED Indications
Table 5-5 MIFM-U( ) Default Switch Settings
SW2-1 SW2-2 Description
Off Off Normal Operation
On Off Factory Test
Off On Not Used
On On FROM (Flash ROM) load
from EPROM (Erasable
Programmable Read Only
Memory)
SW1 Description
On System boot by Flash ROM
Off System boot by EPROM
Table 5-6 MIFM-U( ) LED Indications
LED Description On Flashing Off
LIVE ETU status Operation stopped
(Power On)
Normal Operation No Power
LED1 Programming status Problem when
loading Flash ROM
or
PC or LCR
Programming
connected
Loading Flash ROM
from EPROM
Not Used