Hardware manual

Electra Elite Issue 8
System Hardware Manual 5 - 3
When inserting or removing an ETU, be sure the wrist strap is
connected to the Frame Ground Terminal on the KSU.
When holding an ETU, do not touch the components or the
soldered surfaces with your bare hands. Place one hand
under the bottom corner of the ETU and with the other hand
hold the ejector tab (located in the top corner of the ETU).
Figure 5-2 Inserting or Removing ETUs from the KSU
Figure 5-3 Handling an ETU
Frame
Ground
Term in al
ETU
KSU
Wrist
Strap
Ejector
Tab