Hardware manual
Electra Elite Issue 8
System Hardware Manual 4 - 41
4. Connect the battery cable that comes
from the Basic KSU to the extra battery
connector of the battery cable above.
Before putting the covers on the Basic
and Expansion KSUs, remove the
knockouts (indicated by the arrows) with
nippers. On the Basic KSU, knockouts
must be removed from the top and the
bottom of the KSU cover. On the
Expansion KSU, only the bottom
knockout is removed. Refer to Figure
4-44 Removing the Knockouts on the
Covers of Basic and Expansion KSUs.
Figure 4-44 Removing the Knockouts on the
Covers of Basic and Expansion
KSUs
Expansion KSU
Basic KSU