Hardware manual

Issue 8 Electra Elite
4 - 34 Installing KSUs
2. Install the batteries into the bottom space at the left
side the KSU. Refer to Figure 4-35 Placing the
Batteries into the KSU.
3. Install the battery cover as illustrated in Figure 4-35
Placing the Batteries into the KSU.
4. Connect the cable to the BATTERY INT connector
of the PSU as shown in Figure 4-36 Connecting the
Batteries to the Power Supply Unit.
Figure 4-35 Placing the Batteries into the KSU
Figure 4-36 Connecting the Batteries to the Power
Supply Unit