Hardware manual

Issue 8 Electra Elite
4 - 30 Installing KSUs
2. Install the P64-U10 PSU into the bottom space of
the KSU and attach to the KSU using the two
provided screws.
3. Lead the KSU power cable through the clamp and
connect the PSU as shown in Figure 4-30
Connecting the PSU Power Cable to the Basic KSU.
Figure 4-29 Mounting the PSU onto the KSU
Figure 4-30 Connecting the PSU Power Cable to the
Basic KSU
Clamp
FG Terminal
Clamp
Power Cable
Clamp