Hardware manual

Issue 8 Electra Elite
4 - 22 Installing KSUs
3.7 Rack Mounting the Basic KSU
1. Mount the RAK-U10 Unit to the equipment rack using the six
provided screws. Refer to Figure 4-19 RAK-U10 Unit and
KSU. Use three screws on the right side (at 1, 2, and 3) and
three screws on the left side.
2. Mount the Wall Mount Bracket onto the RAK-U10 Unit using
the four provided screws. Install two screws in the upper
holes (at A) and two screws in the lower holes (at A
1
).
Figure 4-19 RAK-U10 Unit and KSU
RAK-U10 Unit
2
3
Wall Mount
Bracket
KSU
A
1
A
1