Hardware manual

Electra Elite Issue 8
System Hardware Manual 4 - 21
3.6 Wall Mounting the Expansion KSU
1. Fit the bottom of the Expansion Wall Mount Bracket to the top
of the Basic Wall Mount Bracket. Refer to Figure 4-18
Attaching the Expansion Wall Mount Bracket to the Basic
Wall Mount Bracket.
2. Hang the KSU on the two hooks protruding from the
expansion wall mount bracket as shown in Figure 4-16
Hanging the Basic KSU on the Bracket.
3. To secure the KSU to the wall, install a screw (locally
provided) in the hole in the center of the wall mount bracket
as shown in Figure 4-24 Securing the KSU to the Floor
Mounting Bracket.
Figure 4-18 Attaching the Expansion Wall Mount Bracket
to the Basic Wall Mount Bracket