Hardware manual

Electra Elite Issue 8
System Hardware Manual 4 - 15
3. Place the hooks at the top of the cover (previously removed)
into the hangers on the extender and slide left to engage.
Attach the front cover to the front cover extender using the
two screws. Refer to Figure 4-8 Attaching the Front Cover
and Front Cover Extender.
4. To install the front cover and front cover extender on the
KSU, place the hooks at the top of the front extender in the
KSU slots and slide left to engage. Install the provided screw.
Refer to Figure 4-9 Attaching the Front Cover and the Front
Cover Extender to the KSU.
Figure 4-8 Attaching the Front Cover and Front Cover Extender