Hardware manual

Electra Elite Issue 8

System Hardware Manual 4 - 11

2.6 Fax CO Branch Connection

This connection is made via the fourth port on any COI(4)-U( ),

COIB(4)-U

( ), or COID(4)-U( ) ETU. Refer to Figure 4-3 Fax CO

Branch Connection. The facsimile machine is connected to the

eighth port for the slot where the COI(4)-U

( ), COIB(4)-U( ), or

COID(4)-U

( ) ETU is installed.

SECTION 3

NSTALLING BASIC

AND EXPANSION

KSU

S The compact design of the Electra Elite 192 KSU provides easy

installation. The KSUs can be floor mounted or wall mounted. Only the

Basic KSU can be floor mounted. The floor mounting option is for

demonstration purposes only. The information in this section provides

detailed instructions for installing the KSU.

Before beginning installation, ensure that the Power Supply

Unit (PSU) is OFF and that the power cord is disconnected

from the AC outlet.

Do not touch the soldered surfaces of the ETUs.

Figure 4-3 Fax CO Branch Connection

RJ-11

FAX

Demark

Before installing the system; observe the followin

precautions.