Hardware manual

Issue 8 Electra Elite
3 - 4 Hardware Requirements
7.2 Interface ETUs
The slots in the Electra Elite 192 KSUs are flexible except for the
first slot in each KSU that is reserved for the CPUB/I( )-U( ) ETU or
EXP-U10 ETU. Figure 3-1 Interface Slot and System Port Numbers
for an Electra Elite System shows the slot and port numbers.
The MIFA-U( ) ETU must be installed in the AP slot for MIS to
work.
The MIFA-U( ) ETU with KMA(1.0)U must be installed in the AP
slot for ACD to work.
MIFM-U
( ) ETU must be installed in S1 or S2 for the internal socket
modem to work. It can be installed in the AP slot or S1/S2 if a
locally provided external modem is used.
The MIFM-U( ) ETU with KMM(1.0)U must be installed in the AP,
S1, or S2 slot for LCR and Caller ID scrolling and dialing to work.
DTP/DTH/DTR-32D-1 TEL
DTU-32D-2 TEL
32-line digital Multiline Terminal
with LCD and softkeys
DTR-1R-1 TEL
D
term
Multiline Cordless
Telephone without LCD
DTR-4R-1 TEL
D
term
Multiline Cordless
Telephone with LCD
DTU-4R-1TEL Multiline Cordless Telephone
with LCD
ETW-8-1/2 TEL 8-line Multiline Terminal without
LCD
ETW-16DC-1/2 TEL 16-line Multiline Terminal with
LCD
ETW-16DD-1/2 TEL 16-line Multiline Terminal with
LCD
ETW-24DS-1/2 TEL 24-line Multiline Terminal with
LCD
ETW-4R-1 TEL Multiline Cordless Telephone
with LCD
EDW-48-1/2 DSS/BLF 48-line DSS/BLF or outside
lines with 12 function keys.
SLT(1)-U10 ADP Single Line Telephone Interface
Adapter
Equipment Description