Hardware manual

Electra Elite Issue 8
System Hardware Manual 3 - 3
Straight RS-232C cable and adapter (provided with the
MIFM-U( ) ETU) cable to connect a locally provided modem
(not needed if the optional internal modem is used)
MIFM-U( ) ETU installed in the Electra Elite 192 system
SECTION 7
D
ETERMINING
R
EQUIRED EQUIPMENT To determine equipment type and quantity to be installed, the technician
must be familiar with available station equipment and interface ETUs.
7.1 Station Equipment
The station equipment that can be installed with the Electra Elite
192 system is listed below.
Equipment Description
DBM(B)-U10 Box Basic Message Display Board
with 8 LEDs
DBM(E)-U10 Box Expansion Message Display
Board with 8 LEDs
DCR-60-1/DCU-60-1
CONSOLE
Attendant Console with 60
programmable line keys
DTP/DTH/DTR-2DT-1 TEL 2-line digital Multiline Terminal
without LCD
DTP/DTH/DTR/DTU-8-1 TEL 8-line digital Multiline Terminal
without LCD
DTP/DTH/DTR-8D-1 TEL
DTU-8D-2 TEL
8-line digital Multiline Terminal
with LCD and softkeys
DTP/DTU-16-1 TEL 16-line digital Multiline Terminal
without LCD
DTP/DTH/DTR-16D-1 TEL
DTU-16D-2 TEL
16-line digital Multiline Terminal
with LCD and softkeys
DTP-16HC-1 TEL 16-line digital stand alone
terminal with direct connection
to a single port on the
ESI(8)-U10 ETU
DTP/DTU-32-1 TEL 32-line digital Multiline Terminal
without LCD