Hardware manual

System Hardware Manual 3 - 1
Hardware Requirements Chapter 3
SECTION 1
G
ENERAL
I
NFORMATION The technician should be familiar with the Electra Elite 192 system before
attempting to install it. Review this chapter carefully.
SECTION 2
P
ROGRAMMING
S
TATIONS Two programming positions are available in the Electra Elite 192 system.
Station equipment that is connected to the first ESI(8)-U
( ) ETU is
automatically set as a programming position that must have a display
Multiline Terminal.
SECTION 3
A
TTENDANT STATIONS An unlimited number of Attendant positions can be assigned in the Electra
Elite 192 system. An Attendant Position can have one to four DCU-60-1
Consoles attached. Each Attendant Console must be supported by an
ESI(8)-U( ) ETU. A maximum of four Attendant Consoles can be installed
in each Electra Elite 192 system.
SECTION 4
P
ROGRAMMING FROM
A PC Electra Elite 192 systems can be programmed using a personal computer.
The Menu Programming option available with PC Programming allows the
technician/end-user easy access to all information that can be
programmed on the Electra Elite 192 system. The PC must be a 486 or
higher and have Windows 95 or higher to be compatible with the Electra
Elite 192 system.