Owner manual

CATALOG # DESCRIPTION LBS/KG
UA-53 DOOR (S/N PRIOR TO 55234 MUST BE 24/11
DRILLED ON SITE)
UA-54 CAP SCREW FOR REVOLVING PLATE 1/.4
UA-55 BABBITTED BUSHING F/ FRONT BEARING 3/1
(FOR USE WITH UA-50 AND UA-71)
UA-55N NEEDLE BEARING (FOR USE WITH UA-50A 3/1
AND UA-71A)
UA-56 REAR BABBITTED BUSHING WITH 5/2
ADJUSTING SCREW THREAD
UA-57 MALLEABLE BRACKET FOR COVER 2/1
UA-58 LOCK LEVER FOR ADJUSTING SCREW 2/1
UA-59 SET SCREW FOR FRONT NEEDLE BEARING 1/.4
(GREASE ADAPTOR)
UA-60 SET SCREW FOR REAR BEARING 1/.4
(GREASE ADAPTOR)
UA-62 CAP SCREW FOR UA-57 COVER BRACKET 1/.4
UA-63 WASHER FOR CAP SCREW (FOR STAT. PLATE) 1/.4
UA-64 LAG SCREW 1/.4
UA-67 SHOCK ABSORBING SPRING FOR DOOR 1/.4
UA-68 V-BELTS, SET OF 4 (FOR S/N PRIOR 1/.4
TO 61076 AND LATER THEN 67672)
V-BELTS AVAILABLE FOR ALL UNITS - SERIAL NUMBER REQUIRED
UA-69 4-GROOVE V-PULLEY FOR MOTOR (SPECIFY 8/4
RPM, KEYWAY, SHAFT DIAM. FOR S/N PRIOR
TO 61076 AND AFTER 67672)
UA-69-1 2-GROOVE V-PULLEY FOR MOTOR (SPECIFY 5/2
RPM, KEYWAY AND SHAFT DIAMETER FOR
S/N BETWEEN 61076 AND 67672)