Instructions

DC2412-UPSD
|
DC2412-UPS-LDD
|
UPSIC-1205D
|
UPSIC-2403D
26
Deutsch
SetTimeToShutdown() 0x32
This set-word function communicates to UPS that System Shutdown has been initiated
(Win-Software). This command has to be sent right before initiating System Shutdown.
Furthermore the Time Value in [sec.] for System Shutdown must be transmitted. After this
time the output is disconnected.
Cmd Name Access Type Min. Max Unit
0x32 SetTimeToShutdown() W UInt8 0 255 sec.
Transfer packet: 0x01 0x04 0x03 0x32 0xXX 0x04
0xXX: Time in hex format (e.g. 14hex=20s)