Instructions

UPSI-1208(D) | UPSI-2406(D)
32
Deutsch
GetBatteryStateOfHealth() 0x4F
This read-word command returns the SoH information of the battery in percentage of
design capacity anddesign energy.
Cmd Name Access Type Min. Max Unit
0x4F GetBatteryStateOfHealth() R Uint16 0 65535 mV
Transfer packet: 0x01 0x03 0x04 0x4F 0x04
22.5 Command Index “Parameter” 0x07
Paramter ID Description
ID Description
0 Place holder entry. Do not use!
1 Load sensor parameter (values in mA)
2 Maximum backup time (values in seconds)
3
Countdown timer to shut down the system when power fail occurs (values in
seconds). Only on USB.
4 Delay timer between output disable and output enable (value in seconds).
5 Required minimum capacity to enable output (values in percent).
6 Maximum backup time when using analogue read pin.
Single Parameter Data Format:
The data format: AAbbBBccCCddDDEEffFF
ID Description
AA Parameter ID (Byte)
BBbb Minimum Value (Uint16)
CCcc Maximum Value (Uint16)
DDdd Standard Value (Uint16)
EE Is Active (Byte BOOL)
FFff Value (Uint16)
NOTE: The size of parameter structure is 10 bytes long.