Datasheet

Windows® is a registered trademark of Microsoft Corp., NetWare® is a registered trademark of Novell. Specification is subject to change without notice. Errors excepted. Windows® is a trademark of Microsoft Inc. Status as at: 24.07.2014
Bicker Elektronik GmbH | 86609 Donauwörth | Germany
Tel. [phone] | [e-mail] | www.bicker.de
UPS systems
AC UPS
Status display and alarm
Status display Alarm Alarm sound detachable LED
Normal UPS mode – green
Battery charge (mains mode) – green flashing
UPS battery mode 2 beep sounds every 3 seconds yes red flashing
UPS battery mode (Battery low) 4 beep sounds a second no red flashing (quickly)
Overload (Normal mode) Continuous sound no red
Internal UPS failure 8 beep sounds per 2 sec., 2 sec. stillness no red flashing (quickly)
Overtemperature 8 beep sounds per 2 sec., 2 sec. stillness yes red flashing (quickly)
Battery defect – red flashing (quickly)
Model overview
Drawing IUPS-401
Tolerance ±0.5 mm
Article Interface Load sensor UPS management software Reboot function
No. switch off
IUPS-401 USB ≤ 33 W
IUPS-401-B5 USB ≤ 20 W
IUPS-401-BB USB ≤ 8 W
IUPS-401-BC USB ≤ 0 W
IUPS-401-B1 SERIAL (D-SUB) ≤ 33 W
IUPS-401-B4 SERIAL (D-SUB) ≤ 20 W
IUPS-401-BA SERIAL (D-SUB) ≤ 8 W
IUPS-401-B9 SERIAL (D-SUB) ≤ 0 W
If mains voltage returns after a power failure
while Windows® is already shutting down,
the UPS switches the PC off (after the shut-
down period) and switches it on again after
approximately 30 seconds (observe BIOS
settings of mainboard).
If mains voltage returns after a power failure
while Windows® is already shutting down,
the UPS switches the PC off (after the shut-
down period) and switches it on again after
approximately 5 seconds in conjunction with
RUPS 2000 and an ACPI-PC (observe BIOS
settings of mainboard).
UPSilon 2000 and internal USB
cable included in delivery (WIN 98,
NT, 2000, 2003, XP, ME, Vista, 7,
Novell NetWare®, LINUX, FreeBSD,
others on request). External USB
cable 2.0, A-/B-plug / 500 mm
included in delivery.
RUPS 2000 OEM, UPS manage-
ment software included in
delivery.
Optional accessory  For detailed information please visit our website www.bicker.de and refer to the article number.
Article No. Description
PSZ-1023 Y-cable for IUPS-401