Datasheet

Specification is subject to change without notice. Errors excepted. Status as at: 06.11.2015
Ripple and Noise was measured by a 20 MHz bandwidth limited oscilloscope with connected 100 nF and 10 µF capacitors at the output.
The final assembly has to comply with the valid EMC and safety standards.
Article Output Output current Ripple & Efficiency
No. voltage min rated load Noise
BET-1012M +12 V 0 A 8.3 A <120 mV
ss
88 %
BET-1015M +15 V 0 A 6.6 A <150 mV
ss
88 %
BET-1019M +19 V 0 A 5.2 A <190 mV
ss
88 %
BET-1024M +24 V 0 A 4.1 A <240 mV
ss
89 %
Optional accessory  For detailed information please visit our website www.bicker.de and refer to the article number.
Article No. Description
KP-01 Cling pad for fast and easy attachment of desktop adapters
X1-135 Power cord with European IEC-60320-C7 connector
PSZ-1008 Female adapter, DC jack on screw terminal (for models BET-1019M and BET-1024M)
CB-TRG-EXT DC extension cable
Drawing BET-1019M and BET-1024M
Drawing BET-1012M and BET-1015M
Tolerance chassis ±0.5 mm
Tolerance cabel ±50 mm
142 1500
58
37
142 1800
58
37
4
/ UL 1185
Tolerance chassis ±0.5 mm
Tolerance cable ±50 mm
With Kycon KPP-4P or equal
Medical applications
Desktop adapter
Bicker Elektronik GmbH | 86609 Donauwörth | Germany
Tel. [phone] | [e-mail] | www.bicker.de