Datasheet

BET-0900-T
90 Watt
 Desktop adapter for industrial applications
 Only with 105°C high quality capacitors
 Very high reliability (MTBF)
 Energy efficiency level VI / Tier 2
 High efficiency
 Low standby consumption <0.15 W
 Wide temperature range up to +60 °C
 International approvals
Input voltage 90…264 V AC, active PFC
Input frequency 50…60 Hz
Input current 1.2 A max.
Inrush current 60 A max (230 V AC, 25 °C)
Efficiency App. 90 %
Idle consumption <0.15 W
Hold-up time App. 20 ms (115 VAC)
Protection Short circuit protection: Switch off with auto recovery
Overvoltage protection: max. 150 % of nominal voltage
Overload protection: max. 150 % of nominal current, switch off with auto recovery
Overtemperature protection
Insulation voltage Input / Output: 4242 VDC, Input / FG: 2718 VDC
Line regulation ±3%
Load regulation ±≤4 %
Leakage current <0.5 mA earth leakage current (264 VAC)
Safety / EMC EN60950-1, UL 60950-1, CE, designed according to CCC
Temperature Operating: -20…+60 °C / Storage: -20…+85 °C
Derating In the range of +40…+60 °C, 2.5 % / °C
Max. operation altitude 5000 m
MTBF >869000 h according to Telcordia SR-332 at +40 °C
Humidity Operating: 10…85 % RH, non-condensing / Storage: 10…90 % RH, non-condensing
Dimensions (W x D x H) 64 x 151 x 36 mm ±0.5 mm
Weight (net) 0.5 kg
Product specific data
Energy efficiency level Meets DoE / CEC / GEMS / NRCan level VI, ErP level V and Tier 2
Earth conductor The earth conductor PE (primary) is connected to -V
out
(secondary)
Power supplies
Desktop adapter
Technical data
Bicker Elektronik GmbH | 86609 Donauwörth | Germany
Tel. [phone] | [e-mail] | www.bicker.de
Operation
Operation
VI
VI
Leve
lLevel
Extended
Extended
Delivery
5
YEARS
Delivery
5
YEARS
Fanless
Fanless
Eco
Eco
NEW
Ripple and Noise was measured at +21 °C ambient temperature by a 20 MHz bandwidth limited oscilloscope with connected 0.1 µF and 10 µF capacitors at the output and can differ while starting
when ambient temperature drops below 0 °C. Output voltage was adjusted to ±2 % at 60 % load.
The final assembly has to comply with the valid EMC and safety standards.
Article Pin Output Output current Ripple & Efficiency (typ.)
No. voltage min Rated load Noise
BET-0912-T +12 V 0 A 7.0 A <120 mV
pp
App. 90 %
BET-0912-T-B3 +12 V 0 A 7.0 A <120 mV
pp
App. 90 %
BET-0919-T +19 V 0 A 4.7 A <190 mV
pp
App. 90 %
BET-0924-T +24 V 0 A 3.7 A <240 mV
pp
App. 90 %
DC Plug: straight (ø5.5 ø2.5) L10mm
DC Plug type: V+ ─
)─ V-
115
5338
1500
80
DC Plug: straight (ø5.5 ø2.5) L10mm
DC Plug type: V+ ─
)─ V-
115
5338
1500
80
DC Plug: straight (ø5.5 ø2.5) L10mm
DC Plug type: V+ ─
)─ V-
115
5338
1500
80
151
6436
+Vo+Vo
–Vo
–Vo
–Vo
1200
80