Data Sheet

Industrial PC power supplies
AC input
Bicker Elektronik GmbH | 86609 Donauwörth | Germany
Tel. [phone] | [e-mail] | www.bicker.de
Optional Accessories
 For detailed information please visit our website www.bicker.de and refer to the article number.
X1-132
|
Power cord
With IEC-60320-C13 connector,
length 1800 mm
10 %
20 %
30 %
40 %
50 %
60 %
70 % 70 %
85 %
80 %
90 %
100 %
30-10 10 20 40 50 60 700
Operating temperature ( °C)
Output power
Note:
At -10. . . 0
°C ripple and noise can be
higher as stated in the specification
for the first few minutes (after turn-on).
Derating
Article Output Output current Load Ripple &
No. voltage min max regulation Noise
BEA-630H -5 V 0 A 0.1 A ±10 % 100 mV
+3.3 V 0 A 19 A ±5 % 50 mV
+5 V 0 A 16 A ±5 % 50 mV
+12 V
1
0 A 17 A ±5 % 120 mV
+12 V
2
0 A 17 A ±5 % 120 mV
-12 V 0 A 0.5 A ±10 % 120 mV
+5 V
sb
0 A 3 A ±5 % 50 mV
Max. output is 300 W, combined output power at +3.3 V and +5 V must not exceed 105 W. Ripple and noise was measured by a 20MHz oscilloscope with connected 10µF electrolytic capacitor and
0.1µF ceramic capacitor at each output.
This power supply is for assembly purposes only and it must not be operated in unassembled condition. The final assembly has to comply with the valid EMC standards.