Data Sheet

BEA-576H
760 Watt
Efficiency up to 86 %
Excellent regulation
Designed for continuous operation 24/7
Article Output Output current Load Ripple &
No. voltage min max regulation Noise
BEA-576H +3.3 V 0 A 25 A ±5 % 50 mV
+5 V 0 A 25 A ±5 % 50 mV
+12 V 0.5 A 55 A ±5 % 120 mV
-12 V 0 A 0.8 A ±5 % 120 mV
+5 V
sb
0.1 A 3.5 A ±5 % 50 mV
Input voltage 90…264 V AC
Input frequency 47…63 Hz
Input current 12 A (115 V AC) / 6 A (230 V AC)
Inrush current 20 A (115 V AC) / 40 A (220 V AC)
Efficiency 83…86 % (at 115 V AC)
Standby consumption 2.4 W
Hold up time >16 ms
Power-Good-Signal Switch on delay 100…500 ms
Switch off delay 1 ms
Protection Short circuit protection: At each output, switch off / +5 V
sb
, auto recovery
Overload protection: 130…170 %, switch off
Overvoltage protection: +3.3 V (+3.6…+4.3 V), +5 V (+5.6…+6.7 V), +12 V (+13.2…+15 V)
Overcurrent protection: +3.3 V (29.7…40.2 A), +5 V (29.7…40.2 A), +12 V (63.7…86.2 A)
Insulation voltage Input / Chassis 3100 V DC, Input / Output 4242 V DC
Earth leakage current <1.5 mA, 250 V AC
Safety / EMC TÜV, UL, CE, CCC, EN 61000-6-2, EN 61000-6-4
Temperature Operating: 0…+60 °C / Storage: -20…+80 °C
Derating From +50…+60 °C, 1 % / °C
Max. operating altitude 3100 m
MTBF >143600 h according to MIL-HDBK-217F at +25 °C without fan
Humidity Operating: 10…85 % RH, non-condensing / Storage: 10…90 % RH, non-condensing
Dimensions (W x D x H) 150 x 160 x 86 mm ±0.5 mm
Weight (net) 2.6 kg
The BEA-576H PC power supply combines high energy efficiency
with the robustness of industry PC power supplies. It ensures safe
energy supply for high-performance industry PC’s and computers
for image processing applications. Thanks to its high efficiency the
BEA-576H also meets the requirements of the 80 PLUS® standard.
High quality components and an integrated fan monitoring en-
sure a long availability of the computer. A safety clip secures the
mains plug from being pulled out inadvertently.
Max. output power is 760 W, combined output current at +3.3 V and +5 V must not exceed 40 A. Ripple and noise was measured by a 20 MHz oscilloscope with connected 220 μF electrolytic capacitor and 0.1
μF ceramic capacitor at each output. This power supply is for assembly purposes only and it must not be operated in unassembled condition. The final assembly has to comply with the valid EMC standards.
®
Operation
Operation
Extended
Extended
Delivery
5
YEARS
Delivery
5
YEARS
Eco
Eco
Industrial PC power supplies
AC input
Te c h n i c a l d a t a
Bicker Elektronik GmbH | 86609 Donauwörth | Germany
Tel. [phone] | [e-mail] | www.bicker.de
Optional accessory  For detailed information please visit our website www.bicker.de and refer to the article number.
Article No. Description
X1-132 Power cord with European IEC-60320-C13 connector